American Cierra Equipment Plastic Lumber, Recycling Equipment,Used Plastic Wood Machinery


 

 Return To Homepage

This impressively efficient Sink/Float Tank System is set up and ready to demonstrate today.
At
$71,825 USD  it is the best value on similar equipment available today.

Call Paul Vanderpool at 315-730-6156 today!

Constructed as follows:

 
Sink Float Tank

  • 30” Wide x 42” Deep x 19’ Long (Over all Height 10’)
  • 12 Gage Carbon Steel
  • Heavy Duty Tubular Frame
     

    Interior

  • Coated with corrosive resistant Epoxy:
    Phenicon High Solids is a VOC-compliant epoxy novolac. The Phenolic coating is  formulated for use as an internal lining for tanks.

     

    Exterior

  • Paint: Sher-Cryl HPA High Performance Acrylic Gloss Coating.

     Power Feed Hopper 
    Feeds material to bottom of Tank

  • 30” Tall x 24” Wide x 24” Long Hopper
    6” x 65” Auger
  • 1 HP AC Motor, 230/460V, 3 PHz, 60 Hz. 

    Material Conveying System
     

  • Three (3) – Top Mounted Mechanically Driven Drum / Paddles that are ontrolled with an AC variable speed Motor thru gear reducer.
  • Drive is 1 HP, 230/460V, 3Phz. 

    Rejects Removal System
     

  • One (1) - 6” Horizontal Auger 16’ Long - Bottom Tank controlled with a AC variable speed Motor thru gear reducer.
  • Drive is 2 HP, 230/460V, 3Phz.
  • One (1) - 6” Vertical Auger Out-Side Mounted with Bottom Catch Box controlled with AC variable speed Motor thru gear reducer.
  • Drive is 1 HP, 230/460V, 3Phz. 

    Excepts Cascading Removal System

  • One (1) - 6” Horizontal Auger 48” Long – Side Discharge controlled thru gear reducer.
  • Drive is 1 HP, 230/460V, 3Phz.
  • Material Collection & Discharge Box 

    Water Collect/Circulation Tank

  • Water Collection Box
  • Water Circulation Pump 1 HP, 230/460V, 3PHz.
  • Plumbing with Flow control Valve. 

    Used: Dewatering Screen 

  • 48"  Vibratory water removal screen (Over all Diameter 53”)
  • Single Deck (2 Separations)
  • 3 HP Motor, 230/460V, 3PHz.  
  • Steel Base  

    Used: Gala Spin Dryer

  • Model Number:  3016 BF
  • Dryer Shaft Speed:  790 +/- 5%
  • Motor HP:  7.5
  • Screen Size:  .066” = 1680 micron = # 12 Mesh 

    Electrical Control Panel

  • Complete with VFD’s,  Stop/Starts & Control Starters
  • 45 KVA Setup Transformer. 460V to 575/600V, 3 PHz, 60 Hz.

    Price: $71,825 USD   ~  Fob Palmyra, NY.

  •    
     

     

     

     

    American Cierra Equipment,  Inc., is your source for used plastic equipment, used process equipment, plastic equipment, recycling equipment, used recycling equipment, tire recycling equipment, plastics recycling equipment, pallet recycling equipment, plastic wood equipment, plastic lumber equipment, plastic product wood machinery, plastic wood deck machinery, composite plastic wood, and recycled plastic lumber. Our manufacturers include Cumberland, Davis Standard, Wellex, MPM, MRM, Hartig, Gala, Gloucester, Egan, SSI, and HPM. Our product lines include plastic lumber machines, recycle machines, complete processing lines, rebuilt machinery, used machinery of all types, shredders, grinders, extruders, granulators, injection molders, blow molders, profile extrusion machinery, material handling machinery, film and paper converting machinery, film and sheet equipment. Leasing is available. Appraisal services available.

     

     

    Website designed and maintained by BTB Net Solutions