|
 |
|
To find an item on this page hit CTRL+F
|
|
7160 |
Egan/Prodex |
Co-extrusion |
SHEET LINE |
|
Model: |
Poweflight |
Size: |
3.5"/22" Sheet |
L/D Ratio: |
30 |
Year: |
vari |
|
Equipment used for the manufacture of Polystyrene Sheet Rolls. The rolls were then used in the thermoforming of disposable plastic plates. Equipment List as follows:
One (1) Egan Extruder, 3.5" Powerflight---Three (3) Chrome Roll Stack Cooling System---Winding System---Set up to produce two (2) 22" rolls at once---Screen Changer
One (1) Prodex Extruder(1975), 2.5" Torquemaster TMs, 30:1 L/D; Non-vented---Downstream for sheet production---Winding System
One (1) Brown Thermoformer Model 821 HD (1976)---Trim Press Model TP10--
Two (2) Reinhessische Masch-Bau Gesselschaft Thermoformers (1966), Capacity Unwind 24" and Tension Compensator, Equipped with Preheat Section, Compression Section and Trim Section; ***One was totally rebuilt and never used***
One (1) Pioneer Refrigerant/Air Dryer (1990's)
Air Compressors, Ingersoll Rand Model SSR-EP100 (1990's)
Sullair Compressor, Model 25B-150L, 150 HP (1990's)
Includes Plate and Dish Molds
![]() |
|
|
|
|
|
|
|
|
|
|
7102 |
Leistritz |
Hot Face |
PELLETIZING LINE |
|
Model: |
Z |
Size: |
40MM Twin Screw |
L/D Ratio: |
40 |
Year: |
2000 |
|
Twin Screw Pelletizing Line with Hot Feed Extruder--
Extruder #1: Leistritz Twin Screw, 40MM, 40:1 L/D, Zones 5-10, Ultra High Hardness D4 Barrel, 70 HP---
Extrudere #2: Merritt Hot Feed, 2.5", 12:1 L/D, Zones 3, Conair 304 Pelletizer, Side Feeder TSE 40---Controls: A-B PLC Panel View (*Plus Computerized Data Acquisition System)-- Inclused Strand Die, 10' Water Tank, Vacuum Pump, (3) Loss in weight Feeders w/ Computer Touch Screen integrated to TSE Controls, Vibratory Spiral Pellet Cooling Elevator (10' high), Vibratory Conveying Tray - 3' long, Upstrem Suto Feed Equipment Includes: (3) Auto Pellet Loading Valves---Machine has less than 100 hours,
Under Power-Replacement cost is over $700,000.
 |
|
|
|
|
|
|
|
|
|
|
7196 |
N/A |
Single Shaft |
SHREDDER |
|
Model: |
|
Size: |
45" x 42" |
L/D Ratio: |
|
Year: |
|
|
Single Shaft Shredder, Opening 45" x 42"---150 HpSiemans/Allis Motor, Type 444T, Model RG132---Shaft Diameter is 4" on the outside and goes to 5" where it goes throught the bearing blocks.---
Unit was in operation at time of decommissioning--No nameplate on the unit--Weighs approx. 3 Tons--Ships in 3 sections
 |
|
|
|
|
|
|
|
|
|
|
7188 |
Saturn |
Dual Shaft |
SHREDDER |
|
Model: |
3252 |
Size: |
52 x 32 |
L/D Ratio: |
|
Year: |
1978 |
|
Rebuilt Twin Shaft Shredder--Two (2) 75 HP Motors with Hydraulic Pump providing 150 HP total--Pumps Rebuilt in 2004--
Electrical Control Panel w/ Auto Reverse, Feed Hopper & Stand--
Rebuilt in 2007: New Cutting Knives and Spacers, Shafts, Bearings, Couplings and Reconditioned Motors
 |
|
|
|
|
|
|
|
|
|
|
7159 |
Various |
Wire Chop Line |
WIRE CHOP LINE |
|
Model: |
Various |
Size: |
n/a |
L/D Ratio: |
|
Year: |
|
|
Complete Wire Chop Line capable of 500-1000 lbs/hr. System is wired 480V,3 Phase, requires 200A service. Sold as a complete system-will no separate components. ***Buyer is responsible for disconnecting, rigging and shipping***
One (1) Shred Tech 30 x 36" Shredder, (2) 20 HP Motors---One (1) Cumberland 40 HP Model 20 Granulator---One Triple S Model BX250 Air Table, VFD Controlled---One (1) Grizzly 5 HP Dust Collector---One 16' Incline Conveyor---One (1) 8' Incline Conveyor w/ Eriez Mag Separator---One (1) Surge Bin---One (1) 16' Incline Screw Conveyor, VFD Controlled---Control Panel---Cable Tray, Disconnects, Interconnect Cables
 |
|
|
|
|
|
|
|
|
|
|
7208 |
Varoius |
Wash Line Components |
MISCELLANEOUS |
|
Model: |
|
Size: |
n/a |
L/D Ratio: |
|
Year: |
|
|
Components for a Wash - Purchase separately or as a package---One (1) Sink Float Tank, SS, w/ inside rotors a escape valves---One(1) Vincent Horizontal De-Watering Press w/conveying screw---One (1) Gala Spin rinser, HP, SS, Hollow shaft with Spray Nozzles, Rotary Union in the bottom, no door or screen---One (1) Gala Spin Dryer, Model 12.3BF, ECLN Design, SS, 7 1/2 HP, no door or screen---Call for price
![]() |
|
|
|
|
|
|
|
|
|
|
7162 |
Kongskilde |
Aspirator |
AIR CLASSIFICATION SYSTEM |
|
Model: |
KF 40 |
Size: |
n/a |
L/D Ratio: |
|
Year: |
|
|
Includes a 9 Bag Dust-Fines Collector, CRE 20 attached to a Poly-Vac 40** Rebuilt 5 Years Ago.** FRE 75, Collector Tube, Dust Bags, 42" x 72" Cyclone, KF 40 and Misc. Clamps and Tubes. "No Main Frame"
 |
|
|
|
|
|
|
|
|
|
Return To Top Of This Form
Home
American Cierra Equipment, Inc.
144 Genesee Street
Suite 102-207
Auburn, New York 13021
Phone: 315.252.6630 Fax: 315.252.6652
sierraric@aol.com
Copyright 2002 ©
American Cierra Equipment, Inc.
All Rights Reserved
This Site Maximized For
Internet Explorer
©
Version 5.0
and Higher
|
|
Cierra Industries Inc., is your source for used plastic
equipment, used process equipment, plastic equipment, recycling equipment, used
recycling equipment, tire recycling equipment, plastics recycling equipment,
pallet recycling equipment, plastic wood equipment, plastic lumber equipment,
plastic product wood machinery, plastic wood deck machinery, composite plastic
wood, and recycled plastic lumber. Our manufacturers include Cumberland, Davis
Standard, Wellex, MPM, MRM, Hartig, Gala, Gloucester, Egan, SSI, and HPM. Our
product lines include plastic lumber machines, recycle machines, complete
processing lines, rebuilt machinery, used machinery of all types, shredders, grinders,
extruders, granulators, injection molders, blow molders, profile extrusion
machinery, material handling machinery, film and paper converting machinery,
film and sheet equipment. Leasing is available. Appraisal services available.
|
|
