Plastic Lumber Equipment and recycling and extrusion machinery

To find an item on this page hit CTRL+F

American Cierra Equipment's Newest Listings

7215	Davis Standard/PTI		Water Ring			PELLETIZING LINE
Model:		Size:	4.5"	L/D Ratio:	30	Year:	1995
Davis Standard 4.5" Extruder, 30:1 L/D, Water Cooled, Side Vent, 300 HP DC Motor, 1750/1900 rpm, 500 V-arm, Cast in Heaters (sterling) Magnetic---Hopper w/Feed Opening 12" x 8"--Dynisco 4.5" Screen changer with 3/16 Screen---PTI Water Ring Pelletizer, Model 1000, New in 2003---Gala 8.2 Spin Dryer with Filtered Tank---May be Inspected
7214	ET		Flowmolding			PLASTIC LUMBER LINE
Model:		Size:	2"	L/D Ratio:		Year:
Complete Flowmoulding Line to produce composite lumber- Incudes the following: One (1) 2" Extruder, Mfg. by ET, Hydraulically Driven, 54" Centerline--One (1) Carousel Indexing System which accommodates 10 moulds--One (1) Cooling Tank, 6' Wide x 16' Long--One Hydraulic Drive Control System, 25 HP--One (1) Pneumatic Discharge System---One (1) Discharge Table---Also includes approximately 30 Moulds, 6' and 10' lengths, sizes as follows; 2x2, 2x4, 2x6, 2x8, 3x6, and 4x4.---Footprint: 6' Wide x 26' Long x 6' Tall (70")--- Fine Ground material is placed into the feed hopper of the extruder. The polymer flows into the moulds. The indexing system rotates the moulds into the cooling tank. As the carousel rotates, the moulds are being filled and the pneumatic system is discharging the finished product onto the table. The line is set up with a Closed Loop System for chilling the water.( a 30 Ton Chiller is required, not included.) **American Cierra will provide formulation of material, installation assistance, operator training and product desing for a period of up to 10 working days.
7212	Conair		Up Cut			SAW
Model:		Size:	4"	L/D Ratio:		Year:
Conair Up Cut Saw: Pneumatically Driven Travel for up to 4" Profile, 5HP Electric Motor, 3PH, 240V
7211	Gatto		Two Belt			PULLER
Model:	205-4	Size:	4" x 18"	L/D Ratio:		Year:
Gatto Two-Belt Profile Puller, Model #205-4, 4" x 18" with DC Drive
7209	MPM/Gatto/Conair		Shape			PROFILE LINES
Model:		Size:	2"	L/D Ratio:	24	Year:
Specialty Profile Line -Refurbished in 2006, Never put into production - Set up to make wood spacers for the Lumber Industry-- Includes: One (1) MPM 2" Extruder, 24:1 L/D, 20 HP AC Motor,New (2006) ARC AC Frequency Drive w/ Remote Control, New Gefran Temp Controls, New Cooling Fans, New Circuit Breakers, Die Clamp w/ Adaptor, On Casters---One Corma Corrugator, Model #600S, Steel Chain Design, New Tooling in 2007---One Gatto Profile Puller, Model 205-4, 4" x 18" with DC Drive---One (1) Water Bath, 15' Long x 24" Wide x 6" Deep--- One (1) Conair Up-Cut Saw for up to 4" profile - Can be Inspected - Call for Appointment
7210	MPM		Standard Single Screw			EXTRUDER
Model:		Size:	2"	L/D Ratio:	24	Year:
MPM 2" Standard Single Screw Extruder, Refurbished in 2007, 24:1 L/D, Electrically Heated, Air Cooled, 6 Zone, 20HP AC Motor, New in 2007: ARC AC Frequency Drive with Remote control, Gafran Temperature Controls, Cooling Fans, Circuit Breakers, Die Clamp with Adaptor; on Casters
7213	Corma		Pipe			CORRUGATOR
Model:	600S	Size:	n/a	L/D Ratio:		Year:	1977
Corrugator, Mfg. by Corma, Model #600S, s/n 4560, Steel Chain Design, Panel Box has been Re-wired, Baldor 5HP AC Motor and Powerflex Drive, 3/4 HP Motor for Clamp, Die Attachment. Dies sold separately (specialty dies for the lumber industry, call for details and pricing if interested)
7207	Granutech-Saturn		Single Shaft			SHREDDER
Model:	M160H	Size:	10 Cu. Yd.	L/D Ratio:		Year:	2000
Granutech Saturn Systems Roto-Grind Shredder---Dual 100 HP Hydraulic Power Unit---10 Cubic Yard Infeed Volume, 63" x 79" clear area Ram Charge box--20 HP Load Sensing Force-feed Ram---20" Diameter 159-Cutter Variable Speed Solid Steel Rotor, 2" gap Herringbone Pattern Screen---Hopper Opening is 139" Long x 63" Wide---Includes Material Transfer Storage Bucket Dumper, Hydraulic Dumper powered by a 10 HP, 460V Motor, 4 hydraulic Cylinders with a Capacity of 3,000 lbs.---Bucket measures 48" Wide x 47.5" Deep x 48" Tall--Dump height to top of Shredder Hopper is 126"---Overall Dimensions are 211" Long x 117" Wide x 59" Tall.--- Located Jersey Channel Isles, UK---Concession given against freight costs if shipping back to the US
7208	Varoius		Wash Line Components			MISCELLANEOUS
Model:		Size:	n/a	L/D Ratio:		Year:
Components for a Wash - Purchase separately or as a package---One (1) Sink Float Tank, SS, w/ inside rotors a escape valves---One(1) Vincent Horizontal De-Watering Press w/conveying screw---One (1) Gala Spin rinser, HP, SS, Hollow shaft with Spray Nozzles, Rotary Union in the bottom, no door or screen---One (1) Gala Spin Dryer, Model 12.3BF, ECLN Design, SS, 7 1/2 HP, no door or screen---Call for price
7206	GEHL		Skid Steer			MISCELLANEOUS
Model:	3725	Size:	n/a	L/D Ratio:		Year:
Gehl Model 3725 Skid Steer, Gas Driven, with Forks, Bucket, Front Plate with Toe Hitch, Lights Front and Back---Excellent Condition

Return To Top Of This Form

Home

American Cierra Equipment, Inc.
144 Genesee Street
Suite 102-207
Auburn, New York 13021
Phone: 315.252.6630 Fax: 315.252.6652
sierraric@aol.com